Trellis is laser cut out of 1/8" birch plywood for a thin lightweight structure.
Trellis is also available in metal, however please be aware that this is heavier and will require you to find a way for it to hang properly (possibly with some nail support)
*METAL OPTION will include no bee as it would be too detailed to cut; dimensions would be slightly thicker.
4th, 5th, and 6th Images are of the metal options (no bees for metal) in the different finishes we offer.
5th image finish options from top to bottom- black, rose gold, silver, gold, raw steel.
Approximate dimensions
10" long and 3.25" wide. The inner diameter of the honeycomb is approximately 1.5" these are approximate dimensions, they be slightly more or less...
For Selection: Select bees, no bees or a mix of both.
If you do a mix with a lot of 5 it would be 3 no bees and 2 bees
If you do a mix with a lot of 5 it would be 5 no bees and 5 bees
Please be careful while putting the plants through, we are not responsible for breakage.
WOOD ITEMS - Please keep in mind that due to the laser engraving there may be some residue on the end product. We don't do sanding so if you'd like, you may do that on your own if you choose to.. also, each piece of wood is unique. Each wood piece has its only knots, grains, coloration and so each piece is unique in it's on way.
METAL ITEMS- Please keep in mind that due to the plasma cutting and that metal items may have sharp edges and will require caution when handling. Please also note that on the back side of the metal items may show some extra metals or indentions (please view image 6) It's not noticeable and does not affect the integrity of the item.
